An Information Survival Kit for the Prospective Geothermal Heat Pump Owner - Heat Pumps- Frequently Asked Questions - No. 14

An Information Survival Kit
for the Prospective
Geothermal Heat Pump Owner

February 2001



Frequently Asked Question No. 14

I currently have a propane (or oil or gas) furnace and I am thinking about changing to a GHP. What should I be aware of?

Answer

First of all, there will be a major difference in the air temperature from the supply registers. Heat pumps, regardless of the type, produce lower temperature air than fossil fuel furnaces. Air-source heat pumps produce the coolest air 90°F to 95°F. GHPs produce air of 95°F to 103°F, a small but very noticeable improvement.

Another issue is the ductwork. If the house was not originally equipped for air conditioning, the ductwork may be undersized for the heat pump. Both central air conditioning and heat pumps require more air flow than fossil fuel furnaces. Be sure to have your contractor evaluate this issue. Undersized ductwork results in noise and lower system efficiency.



To Next
Section
Back to Table of Contents
Geo-Heat Center Main Page
Bulletin Vol. 18, No. 2 Table of Contents

For correspondence, please include proper e-mail address within the text to:
geoheat@oit.edu

Geo-Heat Center
3201 Campus Drive
Klamath Falls, OR 97601
Phone: (541) 885-1750
Fax: (541) 885-1754
geoheat@oit.edu

This page was last updated on January 1, 2008 by the Geo-Heat Center
© 1996 - 2008 Geo-Heat Center
http://geoheat.oit.edu/ghp/faq/faq14.htm